Home Improvements Union is an award-winning design and build firm that specializes in kitchen remodeling, bathroom remodeling, finished basements, attics, home additions, garages, whole house renovations, deck remodeling, siding installation, window and door replacements in Saint Louis. We are committed to developing long-term relationships with our customers. We will exceed expectations and gain your trust through superior performance by every member of our team in Saint Louis. We pride ourselves on bringing professionalism to a trade that has a well-earned, poor reputation.
These versatile barriers come in a bewildering variety of shapes, sizes and materials, but can be classified generally as accordion, bifold or sliding bypass doors. The accordion and bifold types make handier room dividers than the more cumbersome sliding bypass doors, which are usually used as closet closures, but all three types can be adapted to serve as room partitions.
The accordion door looks like the bellows of an accordion and is usually made of pleated fabric or vinyl stretched over a light metal or plastic skeleton. Closing the door stretches out the pleats into a substantial-looking partition; when the door is opened, the pleats fold compactly to one side. Accordion doors, which are hung on rollers from a single overhead track and attached at one side to a wall, are the easiest of the three types of track-mounted doors to install and once in place require little or no adjustment.
Bifold doors consist of wood, plastic or metal panels up to about 2 feet wide hinged together lengthwise, usually in pairs. Pairs of panels can be linked together to form one continuous surface. A bifold door consisting of one or more pairs can be mounted at one side of an opening and closed by pulling it all the way across, or the doors can be installed at each side of an opening and pulled together in the middle. An overhead track guides the bifold door but the weight of the door rests on a pivot that is attached to the floor on the wall side. A pivot at the top of the door holds the assembly upright.
Sliding bypass doors usually consist of two large wooden panels, each hung by wheels from an overhead track. The panels overlap by about an inch and when closed are kept vertically aligned by a small floor-mounted guide. All overhead tracks - whether they support or merely guide a door - sustain considerable stress when the doors are in use and should be attached to a level, structurally supported surface.
Occasionally a track can be fastened directly to the ceiling. But since folding or sliding doors more than 6 feet 8 inches high are seldom readily available and since most ceilings are 8 feet high, installing such doors usually involves attaching the track for the door to a header suspended from the joists, the structural beams that support the ceiling and the floor above.
The location of the joists helps to determine the position of the door. After locating the joists and marking the proposed position of the door, carefully calculate the vertical space needed for the door and its track. Design and construct a header suitable for the type of ceiling involved to fit in the space between the track and the ceiling.
To calculate the height of header to be suspended from a permanently attached ceiling, measure from floor to ceiling at several points along the proposed line of the door. Subtract from the shortest of these measurements (thus allowing for any unevenness in floor or ceiling) the height of the door and its track plus the thickness of the wallboard or other covering to be applied to the bottom of the header. The result is the height of the header frame; its length is the distance from wall to wall. Attach the header to the ceiling joists, fasten the track to the header and mount the door in its track.
For a door that is hung directly from the ceiling, locate the joists and attach the track directly to them through the ceiling material.
Ideas For Attic Remodelling
If you're looking to give your kitchen a full remodelling, you'll probably have to substantially dismantle your existing arrangements. While many people choose to get professional help for the dismantling and disposal of their kitchen, it can actually be a straightforward DIY task if you're merely changing the units and not moving around the major utilities. If you're inclined to see your kitchen remodel as an opportunity for a hands-on DIY project, there are a few essential things you need to remember.
Safety is an all-important concern and you'll need to make sure your work environment is as safe as possible before you start dismantling. First of all, make sure that all circuits to the kitchen area are turned off. Tape down the breakers to ensure they don't inadvertently get turned back on. If it's not clear which circuits go to which area on your fuse box, then either turn off all the power or call in a professional. It's not worth the risk! If you need to move any major utilities such as the dishwasher or cooker, it's a good idea to shut off your gas and water supplies while you're working.
Once you've prepared a safe work environment, it's important to know where you're going to put all the refuse you'll create and the old units ready for disposal. That's why it's wise to hire a skip in advance to save yourself the hassle of dumping everything around the back of your property or making multiple trips to the recycling centre. Regardless of what you plan to do with the remnants of your old kitchen, it saves a lot of time if you have a convenient place to store them while you're working.
It's also vital that you avoid some of the most common mistakes that come with a DIY kitchen remodelling. For example, some people don't allow themselves enough time to remodel and consequently haven't made arrangements for a temporary kitchen space that can be used for basic cooking and perhaps eating. It's important to hang plastic covers over doorways to stop dust and debris from making its way into your living or dining rooms. Ignoring the need to cook and keep dust to a minimum can lead to unnecessary stress that may hold up the entire project.
The worktop will be screwed onto the base units from underneath, so its removal is a simple job of unscrewing the worktop, running a knife along the join between the worktop, and the tiles/wall if it's sealed with silicon, and lifting the worktop clear.
The biggest mistake you could make, though, is to damage either your walls or units that you want to reuse. In order to avoid this, it's important to remove all doors and drawers before thinking about removing the units. Then start by dismantling the base units, because this will allow you easier access to any cabinets mounted on the wall. Units are normally either screwed or bolted into the wall. In either case you need help from someone who will hold the wall unit in place while you unscrew/unbolt them.
These are just some starting tips to help you make your DIY kitchen remodelling run smoothly. Remember, if you're at all unsure about removing appliances, flooring or units, it's a good idea to opt for professional help. A DIY project can quickly go wrong if mistakes are made, so more complex projects will benefit immeasurably from in-depth, expert advice.
Contact us to Learn More about our Services
Residential Contractor Reviews Saint Louis